AMX Mod X 1.8.2 for 2013 HLDS Update
 

We have released AMX Mod X 1.8.2 as an emergency bug-fix release. It is very important that you do not upgrade until you have read below.

The February 2013 update to Counter-Strike 1.6 is part of a large transition of HLDS games to SteamCMD. Because this transition is not yet complete, AMX Mod X may not yet work on specific games. Those games are listed below.

In addition, a Metamod update is required for all new servers. We are providing our own Metamod builds (branded as Metamod 1.20-am) until the official Metamod site can be updated. Note that on Linux, the Metamod DLL had to be renamed, which means you will have to edit liblist.gam. This is true even if you choose to use Metamod-P.

AMX Mod X 1.8.2 will NOT WORK on the following games:

• Any server installed using HLDSUpdateTool

Metamod 1.20-am and 1.21-am will work on all games supported by Metamod 1.19
(CS:CZ Bots cause a crash with 1.20-am so use 1.21-am instead).


To get all downloads, visit http://www.amxmodx.org/downloads.php
For upgrade instructions and a full changelog, visit http://wiki.alliedmods.net/AMX_Mod_X..._Release_Notes

Special thanks for this release goes to patch contributors Scott Ehlert, arkshine, Fysiks, Reuben Morais, Lev2001, joaquimandrade, Hawk552, and Ryan L. Thank you for your support!

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

Bailopan just help me with a doubt that I have, this new update of metamod, amxmodx and the goldsrc engine in general will fix the bug in CS 1.6 linux [SEGMENTATION FAULT] or something like that? Sorry for the offtopic

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

quilhos: AMX Mod X versions other than 1.8.2 will segfault on the SteamCMD version of Counter-Strike 1.6.

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

The thing is I always use amxmodx 1.8.2, and in windows I never have a single problem, but in linux I have a lot of segmentation fault and I have have sure that I use the most recently version of the metamod and other components. Anyway, I will test it and let's see if this stupid bug has gone xb

Thanks mate

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

Looks like the CS 1.6 update itself is buggy. People are reporting so many issues. I'm having problems with CS as well.

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

That's a huge surprise. I'm glad I didn't invest my life savings in the CS 1.6 update!

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

^^

Re: Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

Lmfao........ Sorry for the spam but this made me drop my phone

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

shit update -_-

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

"äöå" does not work in the chat. It suppose to work now right?

Can somebody confirm?

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

Thanks. Anything interesting with MM 1.20-am besides compat? Just curious.

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

Nextra: Good question. Nope - an experimental Mac port (which we hope to release soon) and some random code cleanups. We're staging this development here until it's accepted upstream: http://hg.alliedmods.net/metamod-am

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

It uses UTF-8: http://en.wikipedia.org/wiki/UTF-8

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

AMXX is breaking Counter-Strike's cl_minmodels functionality somehow.

Valve added cl_min_t and cl_min_ct cvars to choose what model you want to display for minmodels.

It works on a stock steamcmd based hlds server, and one with only metamod running.

AMXX is breaking it somehow, even with the latest version linked in this thread.

It displays correctly for the first 10 or so seconds in the server, then reverts to player chosen models for everybody, any tinkering with minmodels after this happens does nothing, even after you connect to a new server not running amxmodx.

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

So now I must update my servers with SteamCMD (with HLDS Update Tool I can't get any updates) ?

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

That is correct

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

Thanks for answer.

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

I can confirm that "ä ö ü" are not working. ... Well ... not a big first post but i try to help ^^

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

Is MM 1.20-am based on Metamod-p (I guess not)? Can MM-p still be used and what's the difference?

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

after installing MM-1.20-am and amxmodx 1.8.2 my zombie server gives me a tons of errors... :(



------

Edit:

fixed this, Nvm, had to update hamdata.ini.

however when i start my hlds it just gives me this:

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

Did you update hamdata.ini as well?

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

edited my post, i've just done that and now it just throws me a sementation fault when i try to start the server.

even without plugins.

Re: Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

What game are you running. 1.8.2 does that if your not in the new 1.6

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

CS 1.6, i've just reinstalled the whole hlds folder using steamCMD and it seems to be perfectly working now, might have been a corrupted file in the amxmodx folder since it runs perfectly if i disable amxmod in the plugins.ini.

anyway, solved, thanks for the fast update on this :)

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

Updated the Upgrade Instructions, replacing hamdata.ini is required for it to work properly

Re: Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

Are you talking about the one from the update ham thread?

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

No, from the 1.8.2 package. About the unofficial update of ham, I've filed a bug report and it should be integrated soon.

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

What? Is Valve porting servers to Mac in addition to clients? That doesn't make sense does it? Mac's aren't typically used for servers AFAIK (I guess I could be wrong here since I avoid that crap like the plague).

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

I have some problems to install SteamCMD on freebsd

so.

I update amxx to 1.8.2 , update metamod, update binary 5787 (with -autoupdate)
But i have problem:

1. When some one join to server , server crashed.
2. MYSQL don't working.

After remove file cs_i386.so , sv don't run.

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

You have to update the game with SteamCMD.

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

Arkshine , my system is freebsd 9.0, when i want to run steamcmd i saw error :

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

Sorry, I'm not pro-linux. Reading the documentation, all I can say is : make sure you are in the directory where SteamCmd is, then do : ./steamcmd.sh.

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

Also having problems....

Re: Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

There are companies that run Mac servers. Haven't seen one but. In school they taught us on all 3 platforms due to what's active in the industry

Re: Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

I've only played with ubuntu but I had to make it executable and install 32bit libs. Seems like it's executing do maybe you just need the libs?

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

I have this :


And script stopped :(

Edit now have


but libsteam.so is everywhere :o

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

Main problem of this update is : we need to wait that server's provider updates their update tool and that can take a looong time :/

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

dram: For the libserver.so error, were you running steamcmd.sh or linux32/steamcmd ? I generally got this error when running the latter.

Providers that also host CS:GO servers... or any of Tripwire Interactive's game servers... should already have steamcmd support up and running.

Providers should switch soon now, because Valve is planning on pushing all servers available through Steam over to SteamCMD.

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

return

Re: AMX Mod X 1.8.2 for 2013 HLDS Update
 

for the people having issues while running steamcmd:

do not run the tool as root, make a new user then login as root and as the new user, chmod the directory like this on the root login:

cd -R 777 /etc/servers/ (i run multiply servers with over 20 ftp accounts)

then you just run the tool as the new user (NOT ROOT), be sure you give the user sudo access.


if you google it you can find it, i've googl'd it myself aswell :)

also here is the link were i learned from on how to do this:

https://developer.valvesoftware.com/wiki/SteamCMD

if you use 64bits, be sure to read and install the "32-bit libraries on 64-bit Linux systems" on that page i just linked. this all worked fine for me.